Showing 21–30 of 149 results
Dimar 119X812 Series Stagger Shear Tooth Bits$59.00–$64.78
Double Flute unique design cutting angles.
Excellent routing on double sided melamine, laminated material and veneer. Suitable for plunge and rout jobs on cut-outs, doors, frames, etc. Works well on solid surface materials.
Dimar 121RX-XX Series Traditional Bits – Plunge Type, 2 Flutes$52.44–$60.77
This bit is similar to the beading-type bits but has an additional edge to the profile.
Dimar Arbors – Router Cutter Arbors w/ Nut and Washer$0.67–$24.21
Dimar B4X Series – Up-Cut Shear Straight Bits, 2 Flutes$25.86–$42.88
Dimar B8X Series – Bottom Carbide Straight Bits for Plunging 1/2″ Shank, 2 Flutes$25.86–$134.06
D-Tec h Insert Series straight bit for routing or grooving wood. Plunge type.
Dimar Compression 2 Flute Spiral Solid Carbide$75.08–$344.00
Compression bits are used in C.N.C machines, where the feed is fast and steady. Optimum finish is achieved on double sided laminated boards, hardwoods and wood composites.
Dimar R-SET-12 12 Piece Carbide Tipped Router Bit Set, 1/2″ Shank, 2 Flutes$259.95
The Dimar 12 Piece Router Bit Set is the perfect 12 piece starter set for industrial, professional and the do-it-yourselfer. Original premium quality CNC router bits made by Dimar.
- CNC machined – German steel and carbide.
- Thick carbide – advanced D- Max carbide for sharper edge and longer life.
- Anti-kickback design – for maximum safety and easy routing with less torque.
- Flush trim, 1/2″ dia. 101R82-1
- Chamfer, 45º 102R8-45
- Dovetail, 1/2″ dia. – 14º 104R8-12
- V Grooving, 1/2″ dia. – 90º 105R8-12
- Core box, 1/4″ radius 106R8-6
- Straight, 1/4″ dia. 107R8-6
- Straight, 1/2″ dia. 107R8-12
- Rounding over, 1/4″ radius 109R8-6
- Rounding over, 3/8″ radius 109R8-10
- Cove, 1/4″ radius 112R8-6
- Roman ogee, 5/32″ radius 113R8-4
- Rabbeting, 3/8″ 114R8-32
- Allen Key, 3/32″ 1940010
- Allen Key, 5/64″ 1940040
Dimar SCCXX Series Compression Single Flute Spiral Solid Carbide$70.75–$176.13
Compression bits are used in C.N.C machines, where the feed is fast and steady. Optimum finish is achieved on double sided laminated boards, hardwoods and wood composites
Dimar SCNFXXDC Series “O” Flute Spiral – Downcut Solid Carbide – for Aluminum, Mirror Finish$35.37–$53.20
Downcut spiral for improved finish on the top of the board. Suitable for fine ‘finishing’ cuts in aluminum with downward chip removal.
Dimar SCNFXXX Series “O” Flute Spiral – Upcut Solid Carbide – for Aluminum, Mirror Finish$40.57–$73.42
Upcut spiral for improved finish on the top of the board. Suitable for fine ‘finishing’ cuts in aluminum with upward chip removal.