Showing 1–10 of 43 results
Dimar 101RCDX-X Series Compression Bits with Centre Ball Bearing Guide, 2 Flutes$62.35
Used for flushing double sided laminated boards.
Dimar 101RCLX-X Series Down Shear Straight Bits with Centre Ball Bearing Guide, 2 Flutes$61.88 – $79.33
For tear free finish on laminated boards.
* 101RCLSW8-19 is assembled with two ball bearings
Dimar 101RDXX-X Series Trim Bits with Double Ball Bearing Guide$68.14 – $96.09
Dimar 101RHX-X Series Helix Laminate Flush Trim Bits, with Ball Bearing Guide, 2 Flutes$29.76 – $53.96
Dimar 101RX-XU Series Up-Shear Flush Trim Bits, with Ball Bearing Guide, 2 Flutes$30.94 – $56.74
With positive shear angle. For trimming bottom wood and laminates.
Dimar 101RXX-X Series Flush Trim Bits with Ball Bearing Guide$27.05 – $77.18
Dimar 102RBH4-12 Bevel Trim Bit with Down Shear, 2 Flutes$32.12
For smooth trimming on heavily glued area.
Dimar 107R8-XN Series Shear Cut Straight Bits, 2 Flutes$29.12 – $47.65
Down Cut Shear angle of 3 degrees will produce best results in overhead routing of Veneer and Laminated boards.
Dimar 107R8-XU Series Up-Cut Shear Straight Bits, 2 Flutes$32.86 – $55.13
For faster feed rate and increased tool life. Used for deep grooving in hardwood, MDF and other man made materials.
Dimar 109RX-1.5X Series X-File Bits with Ball Bearing Guide, 2 Flutes$32.95
These innovative carbide tipped bits are real time savers. The usual sharp edge created when trimming cut of laminated materials are no longer a concern. There is no need to further file the edge of laminated woods. The lamination is always trimmed flush with the backing material.