Showing 1–10 of 23 results
Belin 12000 Series Solid Carbide Router Bit- Spiral ‘O’ Downcut$13.65 – $94.15
One of Belin’s most popular router bits, the Belin 12000 Series is designed to throw chip waste DOWN. This versatile router bit can cut plastics, woods, foam board, and solid surface materials. Space between the material and the CNC table is required for vacuum/removal. This bit has a left hand helix design with right hand cutting.
Dimar SCNFXXDC Series “O” Flute Spiral – Downcut Solid Carbide – for Aluminum, Mirror Finish$35.37 – $53.20
Downcut spiral for improved finish on the top of the board. Suitable for fine ‘finishing’ cuts in aluminum with downward chip removal.
Onsrud 62-700 & 62-750 Series: Solid Carbide Downcut Spiral O Flute Router Bit IMPERIAL$16.98 – $182.84
Designed to provide a smooth finish in hard or soft plastics with downward chip removal.
Onsrud 67-200 Series Solid Carbide Phenolic Cutter Router Bit$72.66 – $196.21
Equally adaptable to low or high spindle speed applications in any CNC machining environment. The free cutting action of the tools provides for better finishes and significantly lower noise levels.
Onsrud 67-250 Series Solid Carbide Fiberglass Router Bit$234.57 – $305.69
The Onsrud 67-250 Series are designed as fiberglass routers. Their upcut/downcut diamond design effectively shears fibrous materials. Certain tools in the line have been further developed to cut aramid fiber composites.
Onsrud 64-000 Solid Series Carbide Downcut Spiral O Flute Router Bit – Single Flute$46.76 – $130.69
The polished flute allows for razor sharp cutting
edge and easy chip evacuation. The tool is available in a down cut spiral for improved part holding.
Onsrud 62-600 Series Solid Carbide Downcut Spiral O Flute Router Bit – Single Flute$20.15 – $154.91
High speed cutters for machining aluminum
sheet material. These tools are optimized for
use on high-speed CNC mills, high speed
machining centers and CNC routers.
Onsrud 60-950 Series Solid Carbide Extreme Heavy Duty Chipbreaker/Finisher Router Bit – 2 Flute$76.86 – $283.50
Designed to be fed very fast while withstanding
excessive cutting forces and at the same time
leaving a smooth finish.
Onsrud 60-900 Series Solid Carbide Extreme Heavy Duty Hogger Router Bit – 3 Flute$121.59 – $344.26
The Onsrud 60-900 Series router bit is designed for heavy material removal operations where the cutter is subject to excessive cutting forces and finish is not a primary concern.
Onsrud 60-800 Series Solid Carbide Rougher Router Bit – 2 Flute$141.82 – $467.04
Designed for use when faster feed rates cannot be achieved, or on low horsepower machines.