Showing all 10 results
Onsrud 66-400 Series Solid Carbide Cardboard Honeycomb Compression Routing Tool$138.39 – $221.62
The Onsrud 66-400 Series is the cardboard routing tool that lasts longer and delivers a better finish. If you face challenges routing Falcon Board, BioBoard, or other similar materials used for graphic display boards, you should be using this compression spiral bit. The cutting edge pattern has been optimized for shearing cardboard honeycomb core. The compression style flute has been configured for optimal finish and the innovative coating keeps the cutting edge sharper, longer.
Belin 43000 Series Solid Carbide Compression Router Bit 2 Flute Upcut / 2 Flute Downcut$95.11 – $174.56
Designed to equalize up/down cutting pressure when milling laminated materials. Excellent edge finish on both sides
Onsrud 68-100 Series Single Flute Router Bit – PCD Compression Tool$254.12 – $462.73
This economical PCD compression tool will provide long tool life in abrasive wood products. Mortise tip allowing for through cuts and dado’s to be produced using one tool. The compression design ensures chip free edges on the top and bottom.
Onsrud 67-300 Series Solid Carbide Compression Spiral Router Bit$113.61 – $166.18
Onsrud 67-300 Series compression design is suited for a fast feed rate and excellent finish on both sides of the material. This series works well for composite materials and honeycomb core.
Onsrud 66-800 Series DFC Compression for Composites Router Bit (Coated)$287.35 – $578.27
The diamond film coated (CVD) solid carbide compression routers unique geometry prevents delamination on top and the bottom edges of the composites. The open flute geometry dissipates heat to prevent resin flow.
Onsrud 60-600 Series Solid Carbide High Velocity Compression Spiral Router Bit – 4 Flute$275.45 – $300.16
Combine a roughing and finishing cut in one tool for rapid feed rates with a good finish.
Onsrud 60-100C Series Solid Carbide Chipbreaker/Finisher Compression Spiral Router Bit – 2 Flute$134.56 – $205.38
Designed to give the optimum edge finish of the compression spiral bits along with the increased feed rates of the chipbreaker/finisher design.
Onsrud 60-100DC Series Solid Carbide Compression Spiral Router Bit – 2 Flute$136.78 – $191.66
The Tuff Core is an innovative line of solid carbide compression spirals that utilize unique dual grade carbide. The harder outer shell is reinforced by a tough inner core which makes the tool stronger and reduces tool breakage.
Onsrud 60-100MW Series Solid Carbide Max Life Compression Spiral Router Bit – Single, 2, 3 Flute$57.50 – $393.19
Designed for maximum life when cutting in highwear applications. Unique geometries and carbides improve the wear characteristics of the tool under abrasive applications with superior part finish. Mortise compressions are designed with short upcut to allow mortise cut with downcut action.
Onsrud 60-100MC Series Marathon Compression Spiral (Coated) Router Bit – 2, 3 Flute$129.50 – $213.71
The LMT Onsrud Marathon is the longest running compression tool due to advancements in cutting geometry and the addition of a unique Onsrud coating. The coating is formulated to protect the cutting edge from the high temperatures generated when routing laminated and composite wood products.